Product Detail:-
37 D tooling, 45 B tooling, 61BB tooling Azesto Press – IV

MACHINE CONSTRUCTION:-

Compact Design
The powder circulating bend fitted to the feed frame keeps the powder spilling to an absolute minimum. This is noteworthy since the machine is capable of compressing approximately 50,400 tablet per hour.

Drive Configuration The turret is driven by a precise phosphorus-bronze worm Fitted to a bearing mounted worm shaft which is driven by A “V” belt and variable speed pulley mounted on the Motor shaft.

Cam Track Design The Machine incorporates the latest cam track design having smooth cam angles. Smooth cam angles improve punch Travel / which in turn / facilitate tablet ejection and reduce punch head wear extended through lubrication of the cam tracks.

Cleanability The tableting zone has been designed as per the stringent cGMP norms. The main features of the tableting zone include.

Maintenance Major controls and the one-shot lubrication system are easily accessed through the hinged front and rear panels. Since there are no moving parts in this area these are not interlocked, therefore adjustments can be carried out safely while the machine is in operation.

Lubrication All major lubrication points are served by the one-shot lubrication system. Oil cups are provided wherever continuous lubrication is required.

Overload and Pressure Release Effectively, the safety valve of the machine, this is fitted to the lower pressure roll. The overload pressure release should always be set to relieve the pressure with minimum effort consistent with the diameter and hardness of the tablets being made. Adjustments are easily made from the lower cabinet. Serious damage to both the machine and the punches can be prevented through proper use and maintenance of this system.

Motor Overload Any appreciable motor overload that may occur due to tight punches etc. is indicated on an ammeter fitted to the control panel. The average amperage in normal running (tableting) condition is to be noted. Any increase in this average should be immediately investigated.

Technical Specification:-

Type	APT –D–45	APT –B–55	APT –BB–69	APT –BB–75
Type of Tooling	D	B	BB	BB
No. of Station	45	55	69	75
Output tab./hr. *min/max	65000 / 325000	79000 / 396000	99000 / 497000	108000 / 540000
Max. operating pressure	100 kN	65 kN	65 kN	65 kN
Max. Pre-compression Pr.	10 kN	10 kN	10 kN	10 kN
Max. Tablet Diameter	25 mm	16 mm	11.1 mm	11.1mm
Max. Depth of fill	20 mm	17.4 mm	17.4 mm	17.4 mm
Upper Punch Entry	1.5 to 8 mm
Power (Total)	8.75 KW / 11.7 Hp
Main Electric Motor	7.5 KW / 10 Hp
Force Feeder Motor	0.19 KW / 0.25 Hp
Overall Dimension (mm)	1675 (L) X 1775 (B) X 2090 (H)
Net Weight	3800 Kgs.

*Depending upon the characteristics of material and shape & size of tablets.